Description
NOTE: If you’d like to receive an email notification when these scope mounts are back in stock, send an email to cody.christian@f3rmachine.com.
These precision CNC-machined, solid one-piece mounts are the best way to secure your expensive rifle scope to your firearm.
Featuring an integrally-machined recoil lug on the bottom rail surface for MIL-STD-1913 Picatinny rails, serialized/matched ring caps, flush-design rail clamps, chamfered bore edges, and Torx-Plus socket-head cap-screw fasteners. Each ring has 1.15″ of clamping surface, with six clamping screws, providing increased surface area without applying excess pressure to your rifle scope. The edge of the ring bores are chamfered to prevent damage to your scope.
Distance between rings is 2.15″. The 1.25″ height is measured from the rail surface on the bottom to the center of the scope tube bore. Each scope tube bore is machined in the same CNC operation, ensuring they are perfectly concentric and aligned with the bore of the rifle. A binary dot system of batch serial numbers are machined into the upper and lower ring halves before separation, ensuring you receive a matched set.
Machined from 6061 aluminum and Class III Type 2 hard anodized per MIL-A-8625. Weight: 8.1 oz.
G Kaufman –
I have been running a few precision oriented AR platforms for a few years now and appreciate a good cantilever mount to place your optic in the optimal position for proper eye relief while maintaining a solid mounting base on the upper receiver without encroaching onto the hand guard. This mount is my favorite so far, built to last and with an uncommon attention to detail, lapping was unnecessary due to tight machining tolerances and a system to return the caps to the orientation they were machined in. Zero and tracking testing have all been as expected from multiple mid-high end optics, after removing one optic from the mount to test another I returned the original optic to the rifle and was impressed when zero was within 1/4 MOA from when I removed. I appreciate the features, precise machining, and ruggedness of this mount!
H&W Guns And Tactical LLC –
SOLID!!! The one word that describes these rings. From the Precision machined one-piece design, to the binary cap markings that not only insures you get precision matched ring caps and base but allows you to re-install them back to the exact fit before. No need for lapping of these rings, or bedding scopes. The caps fit perfectly and with 6 ring screws, it offers great even holding power for your scope without stressing or damaging your scope. The quality of these rings is second to none! I got a set of these and installed on a precision rifle. I have been more than impressed with the Precision they offer and consistency they bring. The precision lug offers extreme consistent repeatability when removing and re-installing the mount. There is plenty of space between centers for turret adjustments for your windage and elevation, along with plenty of space for optimal eye relief. They setup very comfortably for great cheek weld and sighting. For the Quality, Precision and Ruggedness of these rings you won’t be disappointed. This one-piece scope mount starts out as one piece and finishes as one piece and is marked to ensure its Quality and Precision stays intact. NO ONE in the industry offers that guarantee and quality. SOLID!!!!